[ Japanese/English ]

Mitsuhiro Horade, Ph.D. 
 

Osaka University Graduate School of Engineering
Department of Mechanical Engineering
Kaneko Higashimori Lab.
Assistant Professor


Brief Biography

1997/4-2000/3 : Kinran-Senri High School, Osaka, Japan.
2000/4-2004/3: B.S. in Science and Engineering, Ritsumeikan University, Japan.
2004/4-2006/3: M.S. in Science and Engineering, Ritsumeikan University, Japan.
2006/4-2009/3 : Ph.D. in Science and Engineering, Ritsumeikan University, Japan.
2009/4-2010/3 : Research Fellowship for Young Scientists, Japan Society for the Promotion of Scienc (JSPS).
2010/4-2011/3 : Postdoctoral Fellow of Research Organization of Science and Technology, Ritsumeikan University, Japan.
2011/4-2012/10: Researcher of Graduate School of Science, Nagoya University, Japan.
2012/11-2016/2: Specially Appointed Assistant Professor of Graduate School of Engineering Science, Osaka University, Japan.
2016/3 -Present: Assistant Professor of Graduate School of Engineering, Osaka University, Japan.

Main Works:
Development of micro/nano systems for cell manipulation/analyses.
Fabrication of 3D micro/nano structures such as micro-needle/micro-lens, micro/nano structures with high aspect ratio.
Synchrotron Radiation Lithography & Ablation process.
MEMS

 


 Contact

E-Mail
Address Department of Mechanical Engineering,
Graduate School of Engineering, Osaka University
2-1 Yamadaoka, Suita, 565-0871, Japan

Publications

 Book/Chapter

  • [2] Masaru Kojima, Yasushi Mae, Kenichi Ohara, Mitsuhiro Horade, Kazuto Kamiyama and Tatsuo Arai, CellManipulation and Cellular Parts Assembly for Constructing 3D Cellular Systems. Springer, Hyper Bio Assembler for 3D Cellular Systems., Chapter7, 93-128 (2015).
  • [1] Mitsuhiro Horade and Susumu Sugiyama, Fabrication of 3-D Structures Utilizing Synchrotron Radiation Lithography. InTech, Recent Advances in Nanofabrication Techniques and Applications., No.16, 315-334 (2011).

 Journal Publications

  • [24] M. Horade, C. Tsai, H. Ito, and M. Kaneko, Red Blood Cell Responses during a Long-Standing Load in a Microfluidic Constriction, Micromachines, 8(4), 100-109 (2017).
  • [23] Eunhye Kim, Masaru Kojima, Kazuto Kamiyama, Mitsuhiro Horade, Yasushi Mae and Tatsuo Arai, Releasing of Micro-Objects based on Local Stream Generation by High-Speed Motion of End Effector, International Journal of Mechatronics and Automation (2016).
  • [22] Masaru Kojima, Mitsuhiro Horade, Hirochika Takai, Kenichi Ohara, Tamio Tanikawa, Kazuto Kamiyama, Yasushi Mae and Tatsuo Arai, Generation of Rotational Flow for Formation of Spheroids by Using Microfluidic and Dielectrophoretic Hybrid Device, International Journal of Mechatronics and Automation (2016).
  • [21] C. Tsai, J. Tanaka, M. Kaneko, M. Horade, H. Ito, T. Taniguchi, T. Ohtani and Y. Sakata, An On-Chip RBC Deformability Checker Significantly Improves Velocity-Deformation Correlation, Micromachines, vol.7, 176 (2016).
  • [20] Mitsuhiro Horade, Masaru Kojima, Kazuto Kamiyama, Yasushi Mae and Tatsuo Arai,Development of a Novel 2-Dimensional Micro-Heater Array Device with Regional Selective Heating. Mechanical Engineering Research, Vol.6, Issue1, 66-74 (2016).
  • [19] Pakpoom Kriengkomol, Kazuto Kamiyama, Masaru Kojima, Mitsuhiro Horade, Yasushi Mae and Tatsuo Arai, A New Close-Loop Control Method for an Inspection Robot Equipped with Electropermanent-Magnets. ournal of Robotics and Mechatronics,Vol.28 No.2, 185-193 (2016).
  • [18] Ebubekir Avci, Takayuki Hattori, Kazuto Kamiyama, Masaru Kojima, Mitsuhiro Horade, Yasushi Mae and Tatsuo Arai, Piezo-actuated Parallel Mechanism for Biological Cell Release at High Speed. Biomed Microdevices, Vol.17, Issue5, Art.98, 1-10 (2015).
  • [17] Mitsuhiro Horade, Masaru Kojima, Kazuto Kamiyama, Tomoyuki Kurata, Yasushi Mae and Tatsuo Arai, Development of an Optimum End-effector with a Nano-scale Uneven Surface for Non-adhesion Cell Manipulation Using a Micro-manipulator. Journal of Micromechanics and Microengineering, Vol.25, No.11, 115002-115010 (2015).
  • [16] Photchara Ratsamee, Yasushi Mae, Kazuto Kamiyama, Mitsuhiro Horade, Masaru Kojima and Tatsuo Arai, Social Interactive Robot Navigation Based on Human Intention Analysis from Face Orientation and Human Path Prediction. ROBOMECH Journal, Vol.2, No.1, Art.11, 1-18 (2015).
  • [15] Photchara Ratsamee, Yasushi Mae, Amornched Jinda-apiraksa, Mitsuhiro Horade, Kazuto Kamiyama, Masaru Kojima and Tatsuo Arai, Keyframe Selection Framework Based on Visual and Excitement Features for Lifelog Image Sequences. International Journal of Social Robotics, Vol.7, Issue5, 859-874 (2015).
  • [14] Puwanan Chumtong, Masaru Kojima, Mitsuhiro Horade, Kenichi Ohara, Kazuto Kamiyama, Yasushi Mae, Yoshikatsu Akiyama, Masayuki Yamato and Tatsuo Arai, Flexible Microscaffold Facilitating the in vitro Construction of Different Cellular Constructs. ROBOMECH Journal, Vol.1, No.1, Art.9, 1-10 (2014).
  • [13] Mitsuhiro Horade, Naoki Yanagisawa, Yoko Mizuta, Tetsuya Higashiyama and Hideyuki Arata, Growth Assay of Individual Pollen Tubes Arrayed by Microchannel Device. Microelectronic Engineering, Vol.118, 25-28 (2014).
  • [12] Mitsuhiro Horade, Masahiro M. Kanaoka, Motoki Kuzuya, Tetsuya Higashiyama and Noritada Kaji, A microfluidic Device for Quantitative Analysis of Chemoattraction in Plants. RSC Advances, Vol.3, Issue44, 22301-22307 (2013).
  • [11] Kenichi Ohara, Masaru Kojima, Akira Fukushima, Shun Onozaki, Mitsuhiro Horade, Masumi Yamada, Minoru Seki, Yasushi Mae and Tatsuo Arai, Automated Construction System for 3D Lattice Structure Based on Alginate Gel Fiber Containing Living Cells. Journal of Robotics and Mechatronics, Vol.25, No.4, 665-672 (2013).
  • [10] Puwanan Chumtong, Masaru Kojima, Kenichi Ohara, Yasushi Mae, Mitsuhiro Horade, Yoshikatsu Akiyama, Masayuki Yamato and Tatsuo Arai, Design and Fabrication of Changeable Cell Culture Mold. Journal of Robotics and Mechatronics, Vol.25, No.4, 657-664 (2013).
  • [9] Mitsuhiro Horade and Susumu Sugiyama, Influence of Developer Temperature on the Shape of Structures Fabricated by Deep X-ray Lithography. Microsystem Technologies, Vol.19, Issue3, 357-362 (2013).
  • [8] Mitsuhiro Horade and Susumu Sugiyama, Fabrication of 3-D PTFE Microstructures Utilizing Change of Etching Rate with Respect to Exposure Time. Microsystem Technologies, Vol.19, Issue3, 351-356 (2013).
  • [7] Mitsuhiro Horade and Susumu Sugiyama, Study on Fabrication of 3-D Microstructures by Synchrotron Radiation based on Pixels Exposed Lithography. Microsystem Technologies, Vol.16, Issue8-9, 1331-1338 (2010).
  • [6] Mitsuhiro Horade and Susumu Sugiyama, Shape Prediction of 3-D Microstructures Fabricated by PCT Technique and Synchrotron Radiation Lithography. IEEJ Transactions on Electrical and Electronic Engineering, Vol.5, Issue2, 149-156 (2010).
  • [5] Mitsuhiro Horade and Susumu Sugiyama, Shape-prediction of 3D PTFE Microstructures Fabricated by Synchrotron Radiation Ablation. IEEJ Transactions on Electrical and Electronic Engineering, Vol.5, Issue2, 143-148 (2010).
  • [4] Mitsuhiro Horade, Sommawan Khumpuang and Susumu Sugiyama, 3-D PTFE Microstructure Fabricated Using Synchrotron Radiation Etching. Microsystem Technologies, Vol.14, Issue9-11, 1695-1698 (2008).
  • [3] Mitsuhiro Horade, Sommawan Khumpuang, Kazuya Fujioka and Susumu Sugiyama, Mask Design Compensation for Sloped Sidewall Structures Fabricated by X-ray Lithography. Microsystem Technologies, Vol.13, Issue3-4, 215-219 (2007).
  • [2] Sommawan Khumpuang, Mitsuhiro Horade, Kazuya Fujioka and Susumu Sugiyama, Geometrical Strengthening and Tip-sharpening of a Microneedle Array Fabricated by X-ray Lithography. Microsystem Technologies, Vol.13, Issue3-4, 209-214 (2007).
  • [1] Sommawan Khumpuang, Mitsuhiro Horade, Kazuya Fujioka and Susumu Sugiyama, Microneedle Fabrication Using the Plane Pattern to Cross-section Transfer Method. Smart Materials and Structures, Vol.15, No.2, 600-606 (2006).

 Proceedings in International Conferences

  • [61] H. Ito, R. Murakami, C. Tsai, M. Horade, M. Tanaka and M. Kaneko, Red Blood Cell Deformability upon Continuous or Repetitive Loadings, The 30th IEEE Conference on Micro Electro Mechanical Systems (MEMS2017), Las Vegas, USA, 2017.1, 141-144. (2017).
  • [60] R. Murakami, A. Yamamoto, H. Ito, C. Tsai, M. Horade, M. Tanaka and M. Kaneko, The 30th IEEE Conference on Micro Electro Mechanical Systems (MEMS2017), Las Vegas, USA, 2017.1, 603-604 (2017).
  • [59] M. Horade, C. Tsai, H. Ito, N. Higashino, T. Akai, U. Yokoyma, Y. Ishikawa, S. Sakuma, F. Arai and M. Kaneko, On-Chip Cell Gym. The 30th IEEE Conference on Micro Electro Mechanical Systems (MEMS2017), Las Vegas, USA, 2017.1, 1337-1338 (2017).
  • [58] Masahiro Totani, Masaru Kojima, Mitsuhiro Horade, Kazuto Kamiyama, Yasushi Mae, Toshihiko Ogura, Makoto Kaneko and Tatsuo Arai, A micro channel device for biomechanical analysis to apply a mechanical stimulus on large number of cells. The 27th International Symposium on Micro-Nano Mechatronics and Human Science (MHS2016), Nagoya, Japan, 2016.11,MP-15, 1-2. (2016).
  • [57] Eunhye Kim, Masaru Kojima, Kazuto Kamiyama, Mitsuhiro Horade, Yasushi Mae and Tatsuo Arai,Accurate Releasing of Biological Cells Using Two Release Methods Generated by High Speed Motion of an End Effector. IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS2016), Daejeon, Korea, 2016.10, 2572-2577. (2016).
  • [56] M. Horade, C. Tsai, H. Ito, M. Tanaka and M. Kaneko,"Chameleon Effect'' of RBC Under Loading in Microfluidic Channel. The 20th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS16), Dublin, Ireland, 2016.10, 311-312. (2016).
  • [55] C. D. Tsai, M. Horade, H. Ito, M. Tanaka and M. Kaneko, High-Resolution Cell Manipulation for Longstanding Load on Red Blood Cells. IEEE International Conference on Mechatronics and Automation (ICMA2016), Harbin, China, 2016.8, 914-919. (2016).
  • [54] Kotaro Yamamoto, Masaru Kojima, Mitsuhiro Horade, Kazuto Kamiyama, Yasushi Mae and Tatsuo Arai, Micro-hand positioning in consideration of the obstacle avoidance and the grasping part by using the automatic stage. 2016 IEEE International Conference on Robotics and Automation (ICRA2016), Stockholm, Sweden, 2016.5, 1893-1898 (2016).
  • [53] Hiroki Kawashima, Yasushi Mae, Kazuto Kamiyama, Mitsuhiro Horade, Masaru Kojima and Tatsuo Arai, Extraction of Grasping Region of Object for Automatic Modeling by Observing Human-object Interaction. The 6th International Conference on Advanced Mechatronics (ICAM2015), Tokyo, Japan, 2015.12, 1P1-07 (2015).
  • [52] Yu Hirano, Masaru Kojima, Mitsuhiro Horade, Kazuto Kamiyama, Yasushi Mae and Tatsuo Arai, Development of High Speed Measurement System for Cell-scaffold Interaction. International Symposium on Micro-Nano Mechatronics and Human Science (MHS2015), Nagoya, Japan, 2015.11, 183 (2015).
  • [51] Masaru Kojima, Mitsuhiro Horade, Akira Fukushima, Kenichi Ohara, Shinji Sakai, Kazuto Kamiyama, Yasushi Mae and Tatsuo Arai, Automated Construction System for Cellular Tissue Based on Laminar Flow Fibers. International Symposium on Micro-Nano Mechatronics and Human Science (MHS2015), Nagoya, Japan, 2015.11, 258 (2015).
  • [50] Kotaro Yamamoto, Masaru Kojima, Mitsuhiro Horade, Kazuto Kamiyama, Yasushi Mae and Tatsuo Arai, Automatic Stage Construction for the Support of Micro Object Grasping. International Symposium on Micro-Nano Mechatronics and Human Science (MHS2015), Nagoya, Japan, 2015.11, 296 (2015).
  • [49] Ryo Akiyama, Kazuto Kamiyama, Masaru Kojima, Mitsuhiro Horade, Yasushi Mae and Tatsuo Arai, Development of Multifunctional Robot Hand for Visual Inspection Equipped with 3D Force Sensing. International Symposium on Micro-Nano Mechatronics and Human Science (MHS2015), Nagoya, Japan, 2015.11, 131-132 (2015).
  • [48] Suguru Takata, Masaru Kojima, Mitsuhiro Horade, Kazuto Kamiyama, Yasushi Mae and Tatsuo Arai, 3D Micro-structure Assembling Method by Micro-heater Array Device. The 19th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS2015), Gyeongju, Korea, 2015.10, 1290-1292 (2015).
  • [47] Mitsuhiro Horade, Masaru Kojima, Kazuto Kamiyama, Yasushi Mae and Tatsuo Arai, Development of Novel Micro Fluidic System without Channels and Wells for Trapping-and-releasing of Micro-objects. The 19th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS2015), Gyeongju, Korea, 2015.10, 1484-1486 (2015).
  • [46] Mitsuhiro Horade, Tomoyuki Kurata, Masaru Kojima, Kazuto Kamiyama, Yasushi Mae and Tatsuo Arai, Study on Cell Manipulation Method with High-accuracy Three-dimensional Positioning Using a Manipulator. The 19th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS2015), Gyeongju, Korea, 2015.10, 1268-1270 (2015).
  • [45] Mitsuhiro Horade, Tomoyuki Kurata, Masaru Kojima, Kazuto Kamiyama, Yasushi Mae and Tatsuo Arai, Development of Gripper On-board Micro-Heater and Force Sensor for High-accuracy Micro-manipulation. The 19th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS2015), Gyeongju, Korea, 2015.10, 416-418 (2015).
  • [44] Hideaki Saijo, Masaru Kojima, Mitsuhiro Horade, Kazuto Kamiyama, Yasushi Mae and Tatsuo Arai, Development of Thermos Responsive Gel Coated End Effector for Micro Manipulation. International Conference on Intelligent Robots and Systems (IROS2015), Hamburg, German, 2015.9, 189-194 (2015).
  • [43] Takayuki Hattori, Kazuto Kamiyama, Masaru Kojima, Mitsuhiro Horade, Yasushi Mae and Tatsuo Arai. Generation of Swirl Flow by Needle Vibration for Micro Manipulation. International Conference on Intelligent Robots and Systems (IROS2015), Hamburg, German, 2015.9, 772-777 (2015).
  • [42] Masaru Kojima, Mitsuhiro Horade, Hirochika Takai, Kenichi Ohara, Tamio Tanikawa, Kazuto Kamiyama, Yasushi Mae and Tatsuo Arai, Generation of Rotational Flow for Formation of Spheroid by Using Microfluidics Device. International Conference on Mechatronics and Automation (ICMA2015), Beijing, China, 2015.8, 1041-1047 (2015).
  • [41] Eunhye Kim, Masaru Kojima, Kazuto Kamiyama, Mitsuhiro Horade, Yasushi Mae and Tatsuo Arai, Releasing of Adhered Micro-Objects Using Local Stream Generated by High Speed Motion of End Effector. International Conference on Mechatronics and Automation (ICMA2015), Beijing, China, 2015.8, 1036-1041 (2015).
  • [40] Nyamdorj Khangai, Masaru Kojima, Mitsuhiro Horade, Kazuto Kamiyama, Shinji Sakai, Yasushi Mae, and Tatsuo Arai, Cell Stiffness Measurement Using Two-fingered Micro-hand Equipped with Plate-shaped End Effector. International Conference on Ubiquitous Robots and Ambient Intelligence (URAI2013), Kuala Lumpur, Malaysia, 2014.11, 1 (2014).
  • [39] Kazuto Kamiyama, Masaru Kojima, Mitsuhiro Horade, Yasushi Mae and Tatsuo Arai, Development of Simplified Haptic Interface for Two-finger Micro-manipulator. International Symposium on Micro-Nano Mechatronics and Human Science (MHS2014), Nagoya, Japan, 2014.11, 1 (2014).
  • [38] Takeshi Toda, Kenichi Ohara, Kazuto Kamiyama, Masaru Kojima, Mitsuhiro Horade, Yasushi Mae and Tatsuo Arai, 3D Movement of Legged Robot in Narrow Space. International Symposium on Micro-Nano Mechatronics and Human Science (MHS2014), Nagoya, Japan, 2014.11, 1-2 (2014).
  • [37] Takahiro Motoyoshi, Masaru Kojima, Kenichi Ohara, Mitsuhiro Horade, Kazuto Kamiyama, Yasushi Mae and Tatsuo Arai, Real-time Local Environment Stimulation System with Visual Feedback Control. International Symposium on Micro-Nano Mechatronics and Human Science (MHS2014), Nagoya, Japan, 2014.11, 1-3 (2014).
  • [36] Akira Fukushima, Masaru Kojima, Kenichi Ohara, Mitsuhiro Horade, Kazuto Kamiyama, Yasushi Mae and Tatsuo Arai, Automated Construction System for Fine Lattice Shape Structures Based on Alginate Gel Fiber. International Symposium on Micro-Nano Mechatronics and Human Science (MHS2014), Nagoya, Japan, 2014.11, 1-2 (2014).
  • [35] Mitsuhiro Horade, Masaru Kojima, Kazuto Kamiyama, Yasushi Mae, and Tatsuo Arai, Development of Micro-heater Array Device with Regional Selective Heating for Biochemical Applications. The 18th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS2014), Texas, USA, 2014.10, 5055-5056 (2014).
  • [34] Tomoyuki Kurata, Mitsuhiro Horade, Masaru Kojima, Kazuto Kamiyama, Yasushi Mae and Tatsuo Arai, Development of the Optimum End-effector for Two-fingered Micro-hands System to Support Cell Manipulation. The 18th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS2014), Texas, USA, 2014.10, 1119-1121 (2014).
  • [33] Masaru Kojima, Mitsuhiro Horade, Kazuto Kamiyama, Yasushi Mae, Toshio Fukuda and Tatsuo Arai, Movement of Asymmetric Shape Micro Structure on Bacterial Sheet. The 18th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS2014), Texas, USA, 2014.10, 376-378 (2014).
  • [32] Puwanan Chumtong, Masaru Kojima, Mitsuhiro Horade, Kenichi Ohara, Kazuto Kamiyama, Yasushi Mae, Yoshikatsu Akiyama, Masayuki Yamato and Tatsuo Arai, On-Chip Flexible Scaffold for Construction of Multishaped Tissues. International Conference on Intelligent Robots and Systems (IROS2014), Chicago, USA, 2014.9, 4692-4697 (2014).
  • [31] Takahiro Motoyoshi, Masaru Kojima, Kenichi Ohara, Mitsuhiro Horade, Kazuto Kamiyama, Yasushi Mae and Tatsuo Arai, Development of Chemical Stimulation System for Local Environment Control by Using Combination of Spout and Suction from Dual Pipettes. International Conference on Intelligent Robots and Systems (IROS2014), Chicago, USA, 2014.9, 840-845 (2014).
  • [30] Tomoyuki Kurata, Ebubekir Avci, Kazuto Kamiyama, Masaru Kojima, Kenichi Ohara, Mitsuhiro Horade, Toru Ejima, Tamio Tanikawa, Yasushi Mae and Tatsuo Arai,?Vibration Reduction of Microhand Used in Transporting Operations. International Symposium on Flexible Automation (ISFA2014), Hyogo, Japan, 2014.7, 1-6 (2014).
  • [29] M. Kojima, T. Motoyoshi, K. Ohara, H. Mitsuhiro, K. Kamiyama, Y. Mae and T. Arai, Control of Flagellar Motor Using a Real-time Local Environment Chemical Stimulation System. International Conference on Robotics and Automation (ICRA2014), Hong Kong, China, 2014.6, 4699-4704 (2014).
  • [28] Puwanan Chumtong, Masaru Kojima, Mitsuhiro Horade, Kenichi Ohara, Kazuto Kamiyama, Yasushi Mae, Yoshikatsu Akiyama, Masayuki Yamato, and Tatsuo Arai, Analytical Design and Fabrication of Thermal Latch Valve Driven Flexible Microscaffold for Applications in Tissue Engineering. Nano/Micro Engineered and Molecular Systems (NEMS2014), Hawai, USA, 2014.4, 411-416 (2014).
  • [27] Photchara Ratsamee, Yasushi Mae, Masaru Kojima, Mitsuhiro Horade, Kazuto Kamiyama and Tatsuo Arai, Event Clustering of Lifelog Image Sequence using Emotional and Image Similarity Features. International Conference on Computer Vision Theory and Applications (VISAPP 2014), Lisbon, Portugal, 2014.1, 618-624 (2014).
  • [26] Toru Ejima, Kenichi Ohara, Masaru Kojima, Mitsuhiro Horade, Tamio Tanikawa, Yasushi Mae and Tatsuo Arai,? Development of Microhand Utilizing Singularity of Parallel Mechanism. International Conference on Intelligent Robots and Systems (IROS 2013), Tokyo, Japan, 2013.11, 1525-1530 (2013).
  • [25] Masaru Kojima, Takahiro Motoyoshi, Hirochika Takai, Kenichi Ohara, Mitsuhiro Horade, Kazuto Kamiyama, Yasushi Mae and Tatsuo?Arai, Development of the Long-time Observation System for Bacterial Motor. International Symposium on Micro-Nano Mechatronics and Human Science (MHS2013), Nagoya, Japan, 2013.11, 1-4 (2013).
  • [24] Puwanan Chumtong, Masaru Kojima, Kenichi Ohara, Mitsuhiro Horade, Yasushi Mae, Yoshikatsu Akiyama, Masayuki Yamato and Tatsuo Arai, An Active Microscaffold for Applications in Tissue Engineering. International Symposium on Micro-Nano Mechatronics and Human Science (MHS2013), Nagoya, Japan, 2013.11, 1-2 (2013).
  • [23] Junya Koseki, Kenichi Ohara, Kazuto Kamiyama, Masaru Kojima, Mitsuhiro Horade, Yasushi Mae, Tatsuo Arai, Tsuyoshi Kaneko and Hirofumi Matsui, The Development of an All-In-Focus Algorithm for Endoscopy. International Symposium on Micro-Nano Mechatronics and Human Science (MHS2013), Nagoya, Japan, 2013.11, 1-5 (2013).
  • [22] Hirochika Takai, Masaru Kojima, Kenichi Ohara, Mitsuhiro Horade, Tamio Tanikawa, Yasushi Mae, Masayuki Yamato and Tatsuo Arai, Microfluidic Device for Automated Feneration of Toroidal-like Spheroids. International Conference on Ubiquitous Robots and Ambient Intelligence (URAI2013), Jeju, Korea, 2013.8, 140-143 (2013).
  • [21] Akira Fukushima, Masaru Kojima, Kenichi Ohara, Shun Onozaki, Mitsuhiro Horade, Yasushi Mae and Tatsuo Arai, Automated Construction System for the Fine Lattice Shape Structure Using Alginate Gel Fiber. International Conference on Mechatronics and Automation (ICMA2013), Kagawa, Japan, 267-272 (2013).
  • [20] Mitsuhiro Horade, Yoko Mizuta, Noritada Kaji, Tetsuya Higashiyama and Hideyuki Arata, Plant-on-a-chip Microfluidic-system for Quantitative Analysis of Pollen Tube Guidance by Signaling Molecule: Towards Cell-to-cell Communication Study. The 16th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS2012), Okinawa, Japan, 2012.10, 1027-1029 (2012).
  • [19] Ikuyuki Mitsuishi, Yuichiro Ezoe, Kensuke Ishizu, Teppei Moriyama, Makoto Mita, Noriko Y Yamasaki, Kazuhisa Mitsuda, Mitsuhiro Horade, Susumu Sugiyama, Raul E Riveros, Hitomi Yamaguchi, Yoshiaki Kanamori, Kohei Morishita, Kazuo Nakajima and Ryutaro Maeda, Novel Ultra-lightweight and High-resolution MEMS X-ray Optics for Space Astronomy. Solid-State Sensors, Actuators and Microsystems Conference (TRANSDUCERS2011), Beijing, China, 2011.6, 566-569 (2011).
  • [18] Mitsuhiro Horade, Susumu Sugiyama, Yuichiro Ezoe, Kensuke Ishizu, Teppei Moriyama, Tomohiro Ogawa, Ikuyuki Mitsuishi, Kazuhisa Mitsuda, Seichin Kinuta, Takashi Yamanashi and Yoshiyuki Ichinosawa, Design and Fabrication of Ni Mirror Chip for Space X-ray Telescopes Utilizing LIGA Process. 9th International Workshop on High-Aspect-Ratio Micro-Structure Technology (HARMST2011), Hsinchu, Taiwan, 2011.6, MP.14 (2011).
  • [17] Mitsuhiro Horade and Susumu Sugiyama, Study on Synchrotron Radiation Lithography for Sidewall Inclination Controlled by Development Temperature. 9th International Workshop on High-Aspect-Ratio Micro-Structure Technology (HARMST2011), Hsinchu, Taiwan, 2011.6, FP.02 (2011).
  • [16] Mitsuhiro Horade and Susumu Sugiyama, Fabrication of 3-D PTFE Microstructures Utilizing Change of Etching Rate with Respect to Exposure Time. 9th International Workshop on High-Aspect-Ratio Micro-Structure Technology (HARMST2011), Hsinchu, Taiwan, 2011.6, FP.01 (2011).
  • [15] Mitsuhiro Horade and Susumu Sugiyama, Yuichiro Ezoe, Ikuyuki Mitsuishi, Kensuke Ishizu, Teppei Moriyama, Kazuhisa Mitsuda, Seichin Kinuta, Takashi Yamanashi and Yoshiyuki Ichinosawa, Study on Fabrication of Ni Mirror Chip for Space X-ray Telescopes Utilizing LIGA Process. International Symposium on Micro-Nano Mechatronics and Human Science (MHS2010), Nagoya, Japan, 2010.11, 263-268 (2010).
  • [14] Mitsuhiro Horade and Susumu Sugiyama, Study on Optimization of Exposure Energy Distribution for Fabrication of Arbitrary 3-D Microstructure by Shaped Beam Using Synchrotron Radiation, International Symposium on Micro-Nano Mechatronics and Human Science (MHS2009), Nagoya, Japan, 2009.11, 559-564 (2009).
  • [13] Mitsuhiro Horade and Susumu Sugiyama, Fabrication of 3-D Microstructures by Shaped Beam Using Mask-less X-ray Lithography. 8th International Workshop on High-Aspect-Ratio Micro-Structure Technology (HARMST2009), Saskatoon, Canada, 2009.6, 29-30 (2009).
  • [12] Shunsuke Kajita, Mitsuhiro Horade, Sommawan Khumpuang and Susumu Sugiyama, The New Exposure Method for Acquiring Freer 3-D Structure by Using Synchrotron Radiation. IDW '07 the 14th International Display Workshops (IDW07), Sapporo, Japan, 2007.12, Vol.2, 1361-1362 (2007).
  • [11] Mitsuhiro Horade, Makoto Tsudo, Shunsuke Kajita and Susumu Sugiyama, Advanced Simulation for Shape-prediction of 3-D PTFE Microstructures Fabricated by Using Synchrotron Radiation. International Symposium on Micro-Nano Mechatronics and Human Science (MHS2007), Nagoya, Japan, 2007.11, 214-219 (2007).
  • [10] Mitsuhiro Horade, Shunsuke Kajita and Susumu Sugiyama, 3D Microfabrication of Plastics Using Synchrotron Radiation. (AOFSRR) 2nd Asia-Oceania Forum for Synchrotron Radiation Research, Hsinchu, Taiwan, 2007.11, IV-9 (2007).
  • [9] Mitsuhiro Horade, Shunsuke Kajita and Susumu Sugiyama,3D Microfabrication of Plastics Using Synchrotron Radiation. (AOFSRR) 2nd Asia-Oceania Forum for Synchrotron Radiation Research, Hsinchu, Taiwan, 2007.11, 207 (2007).
  • [8] Mitsuhiro Horade and Susumu Sugiyama, 3D PTFE Microstructure Fabricated Using Synchrotron Radiation Etching. 7th International Workshop on High-Aspect-Ratio Micro-Structure Technology (HARMST2007), Besancon, France, 2007.6, 259-260 (2007).
  • [7] Mitsuhiro Horade, Makoto Tsudo, Sommawan Khumpuang and Susumu Sugiyama, 3-Dimensional Microfabrication of Polytetrafluoroethylene by Using Synchrotron Radiation. IDW '06 the 13th International Display Workshops (IDW06), Otsu, Japan, 2006.12, Vol.2, 1561-1562 (2006).
  • [6] Sommawan Khumpuang, Mitsuhiro Horade, Kazuya Fujioka and Susumu Sugiyama, Portable Blood Extraction Device Integrated with Bio-medical Monitoring System. SPIE’s International Symposium on Smart Materials, Nano-, and Micro-Smart Systems 2005 (SPIE2005), Brisbane, Australia, 2005.12, Vol.6037, 133-140 (2005).
  • [5] Kazuya Fujioka, Sommawan Khumpuang, Mitsuhiro Horade and Susumu Sugiyama, Novel Pressure-gradient Driven Component for Blood Extraction. SPIE’s International Symposium on Smart Materials, Nano-, and Micro-Smart Systems 2005 (SPIE2005), Brisbane, Australia, 2005.12, Vol.6037, 343-350 (2005).
  • [4] Mitsuhiro Horade, Sommawan Khumpuang, Kazuya Fujioka and Susumu Sugiyama, Advanced Simulation for Shape-prediction of Microstructures Fabricated by PCT Technique. SPIE・fs International Symposium on Smart Materials, Nano-, and Micro-Smart Systems 2005 (SPIE2005), Brisbane, Australia, 2005.12, Vol.6037, 417-428 (2005).
  • [3] Mitsuhiro Horade, Sommawan Khumpuang, Kazuya Fujioka and Susumu Sugiyama, Compensation of Mask Design for Sloped Side-Wall Structures Fabricated by X-Ray Lithography. 6th International Workshop on High-Aspect-Ratio Micro-Structure Technology (HARMST2005), Gyeongju, Korea, 2005.6, 48-49 (2005).
  • [2] Sommawan Khumpuang, Mitsuhiro Horade, Kazuya Fujioka and Susumu Sugiyama, Geometrically Strengthening and Tip-Sharpening of Microneedle Array fabricated by X-Ray Lithography. 6th International Workshop on High-Aspect-Ratio Micro-Structure Technology (HARMST2005), Gyeongju, Korea, 2005.6, 2-3 (2005).
  • [1] Mitsuhiro Horade, Sommawan Khumpuang, and Susumu Sugiyama, Method for Accurately Shape-prediction of 3D Structure Fabricated by X-ray Lithography. SPIE’s International Symposium on Smart Materials, Nano-, and Micro-Smart Systems 2004 (SPIE2004), Sydney, Australia, 2004.12, Vol.5650, 418-428 (2004).

To top